Operation; Switching On And Power Setting; Switching Off - Pelgrim IK2064F Anleitung

OPERATION

Switching on and power setting

The power can be set to 9 different levels. The hob also has a 'boost' setting which is indicated
by a 'P' on the display (see 'Boost'). The front left cooking zone has a 'Power Boost' (SP).
1. Place the pan in the middle of a cooking zone.
2. Press the On/Off button.
▷ You will hear a single beep and a '0' will appear in the display
next to each cooking zone. If you don't do anything else, the cooking zone will switch off
automatically after 10 seconds.
3. Press the on/off button for the cooking zone concerned.
4. The '0' next to the selected cooking zone will light up clearly.
5. Using the – and + buttons select the preferred power level. When you select the – button
directly, the cooking zone will be switched on at power level 9.
▷ The set power is visible in the display.
Please note
• All 4 zones cannot be set to level 9 (or P) at the same time if the appliance is connected to 1
phase. The 4 zones can be set to a maximum level 7 at the same time.
• Another zone needs to be reduced or switched off if a higher level is desired. The appliance
will beep and the set power level in the display will start to flash. You should then set the
zones to a lower level!

Switching off

Switching off one cooking zone
▷ One cooking zone is switched on. The display shows a power level between 1 and 9,
or "P".
1. Press the button for the cooking zone to be switched off. Set the cooking zone to '0' with
the – button.
▷ The cooking zone switches off. The hob switches off after 20 seconds, if all cooking
zones are set to '0' and no other process is being used.
Switching off all cooking zones
Several cooking zones are active.
▷
1. Press the On/Off button to switch off all cooking zones.
▷ You will hear a beep. All displays are off. The hob is switched off.
EN 8