Burmeier Dali Montageanleitung Seite 3

Dali care bed
Installation instructions for attaching wooden surround to
chassis head or foot end
Proceed as follows:
1. Prepare the bed for installation:
Remove the plastic stoppers 1 from both ends of
the chassis cross profile.
2. Remove the two screws on the left and right-hand
side 2. to release the panel 2.1..
3. Take the new screws out of the bag on the back
of the wooden surround 3..
4. Fit the wooden surround to the chassis so the
hooks inside the surround (on both sides) fit
exactly over the lugs on the chassis 4..
EN + DE
1
2
3
1
2.1
1.
4
EN