Use Of Reflex Cameras - Optika Italy SZ Serie Bedienungsanleitung

9. Microphotography
9.1 Installing the C-mount adapter
1. Loosen the clamping screw ① on the trinocular
port and remove the dust cap ②. (Fig. 69)
2. Screw the C-mount adapter ③ to the camera ④
and insert the round dovetail of the C-mount into
the empty hole of the trinocular port (Fig. 70),
then tighten the clamping screw ①.
9.2 Use of reflex cameras
1. Insert the Reflex adapter ① into the relay tube
②.
2. Screw the "T2" ring ③ (not provided) to the reflex
adapter.
3. Connect the Reflex camera ④ to the "T2" ring just
installed. (Fig. 71)
4. Mount the other end of the relay tube ② into the
empty hole of the trinocular port, then tighten the
clamping screw. (Fig. 69)
• "T2" ring is not provided along with the microsco-
pe, but is commercialy available.
• While shooting dark specimens, darken eyepie-
ces and viewfinder with a dark cloth to miminize
the diffused light.
• To calculate the magnification of the camera:
objective magnification * camera magnification *
lens magnification.
• When using an SLR camera, mirror mo-
vement may cause the camera to vibrate.
We suggest lifting the mirror, using long ex-
posure times and a remote cord.
④
Page 37
② ②
① ①
F F ig. 69 ig. 69
③
F ig. 70 F ig. 70
③
①
②
F F ig. 71 ig. 71
④