Power Save Mode; Sound Mode - Hitachi PD1 Handbuch

OTHERFEATURES (continued)

Power Save Mode

I When the RGB input is selected
• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can
be set to be activated automatically when the computer is not being used to reduce power
consumption by this unit.
RGB sync signal
Video signal
Operation mode
Indicating lamp
Power consumption
I When the Video Input is selected
• When there is no video signal input, the power-saving system operates to reduce the power
consumed by the sunit.
Video signal
Screen display
Operation mode
Indicating lamp
Power consumption

Sound Mode

I If you press the MENU button while the monitor has power save mode turned off,
sound output is enabled by cancelling the off setting of power save mode.
• When the monitor enters sound mode, it displays a
mode indication on the screen.
• In sound mode, sound volume can be adjusted.
I Press the MENU button to cancel sound mode.
• Power save mode is enabled when sound mode is
canceled.
• If an input signal is available, the monitor displays the
input signal by canceling sound mode automatically.
22
Horizontal Yes
Vertical Yes
Active
(normal display)
On
Lights green
360W
(Sound off)
Yes
Active (normal display)
On
Lights green
360W (Sound off)
No Yes
Yes No
Blank (no video)
Off
Blinks green
5W or less
No
Blank (no video)
Off
Blinks green
5W or less
Remote
controller
SOUND MODE
MENU
Remote
controller
POWER SAVE
MENU
No
No