Customising A Timer Programme - OERTLI AD255 Installations-, Bedienungs- Und Wartungsanleitung

AD255
1 2 3 4 5 6
%
0 2 4 6 8 10 12 14 16 18 20
MODE
A000853-B
+
MODE
%
0 2 4 6 8 10 12 14 16 18 20
MODE
C002393-D
1 2 3 4 5
1 2 3 4
%
0 2 4 6 8 10 12 14
MODE
C002436-B
18/07/2018 - 300020545-001-04
2. Press the rotary button.
3. The minutes flash.
7
22 24
4. The hours flash.
5. The number of the day flashes.
1x
6. To return to the principal display, press the MODE key or wait 20
3.2.2.
Only the timer programmes P2, P3, P4 and the domestic hot water
programme P r can be modified.
1. Press the MODE and r keys simultaneously for 2 seconds. The
2"
A000858-A
2. Turn the rotary button to select the timer programme to be
22 24
3. All of the days flash. The new programme will be active every day
6 7
5 6 7 4. Turn the rotary button to the left until 0.00 is displayed. The first
16 18 20 22 24
5. b : Comfort mode selection
3x
To modify the minutes, turn the rotary button.
To confirm, press the rotary button.
To modify the hours, turn the rotary button.
To confirm, press the rotary button.
To modify the day (1 = Monday, 2 = Tuesday, etc.), turn the rotary
button.
To confirm, press the rotary button.
seconds.
To go back to the previous display, press the key r.

Customising a timer programme

time is displayed.
modified. To confirm, press the rotary button.
To go back to the previous display, press the key r.
of the week.
To modify the programme for a particular day, press the rotary button
several times until the desired day flashes.
segment of the graphic bar for the timer programme flashes.
Press the Cx key. The symbol b is steady, the selection mode for
the comfort time ranges is active.
To select a comfort time range, turn the rotary button to the right.
The zone selected is displayed under b on the graphic bar.
v : Reduced mode selection
Press the Cc key. The symbol v is steady, the selection mode for
the reduced time ranges is active.
To select a reduced time range, turn the rotary button to the right.
The zone selected is displayed under v on the graphic bar.
3. Operating instructions
EN
43