Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning the unit
For optimal performance, the appliance should be emptied and cleaned regularly. If the
water/dust container and filter are dirty, the suction performance will decrease.
1.
Press the button to open the container and separate it from the motor unit (Fig. 6).
2.
Pull the F5 fine particulate filter/pre-filter unit out of the container (Fig. 7).
3.
Empty the waste from the water/dust container into a dustbin and, if necessary,clean
the inside of the container with a soft and slightly damp cloth, then allow it to fully dry.
4.
Turn the fine particulate filter to remove it from the pre-filter (Fig. 8).
5.
Dust the various elements using a soft, dry brush, then rinse them with lukewarm water
and allow them to fully dry in the open air for 24 hours.
6.
Reassemble the elements in the container (Fig. 9).
24
V.1.0
cleaningandmaintenance
Figure 6
Figure 9
Figure 7
Figure 8
Figure 10
Figure 11
Werbung
Inhaltsverzeichnis
