Dichiarazione Di Conformita - Philips FW-R55 Bedienungsanleitung

Vorschau ausblenden

100

Inhaltsverzeichnis

Verfügbare Sprachen

Important notes for users in the U.K.

Mains plug

This apparatus is ﬁtted with an approved 13 Amp plug.

To change a fuse in this type of plug proceed as follows:

Remove fuse cover and fuse.

Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or

BSI approved type.

Reﬁt the fuse cover.

If the ﬁtted plug is not suitable for your socket outlets, it

should be cut off and an appropriate plug ﬁtted in its place.

If the mains plug contains a fuse, this should have a value

of 5 Amp. If a plug without a fuse is used, the fuse at the

distribution board should not be greater than 5 Amp.

Note:The severed plug must be disposed of to avoid a

possible shock hazard should it be inserted into a

13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the

following code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour

0 0

markings identifying the terminals in your plug, proceed

as follows:

– Connect the blue wire to the terminal marked N or

coloured black.

– Connect the brown wire to the terminal marked L or

coloured red.

– Do not connect either wire to the earth terminal in

the plug, marked E (or e) or coloured green (or green

and yellow).

Before replacing the plug cover, make certain that the

cord grip is clamped over the sheath of the lead - not

simply over the two wires.

Recording and playback of material may require consent.

See Copyright Act 1956 and The Performer's Protection

Acts 1958 to 1972.

Italia