Water Resistance; Data Memory - Soleus PUSH SF003 Anleitung

SOLEUS PUSH
The Soleus PUSH can record and track your steps, sleep time,
wake time, and deep/light sleep patterns.
There are 2 LED lights inside the PUSH
RED = Sync Mode
WRISTBAND
Align the ARROW
at the top (12hr)
location as shown
when wearing
wristband for best
performance.
BATTERY
The Soleus Push uses a replaceable CR2032 battery. It is
recommended that you get it replaced by authorized
service agent.
If the battery is low, the
flash at 3 -5 second intervals.
ENGLISH
BLUE = Sleep Mode
RED and BLUE LED lights will

WATER RESISTANCE

Your device is water resistant but it is not recommended for
water sports. Should it become completely submerged in
water, dry it with a clean, dry cloth before pressing any
buttons. The button should never be pressed while the
device is submerged in water.
BEFORE FIRST USE
ARROW
The Soleus PUSH is in hibernation to conserve battery.
- press and hold S1 for 3 - 5 seconds
S1
- the RED LED and
- the BLUE LED will light up for 5 seconds and then turn off
- your device is now ready to use!

DATA MEMORY

- Your PUSH device can store 7 days worth of data. When
PUSH memory is full, the oldest file will be automatically
deleted and replaced by newest file.
- We recommend that you sync your device with your
smartphone daily, so that all of your data will be stored in
the Soleus GO! app.
BLUE LED lights will flash twice