Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INsTALLATIoN / cIRcuIT LoADINg
0
the messages displayed by the machine during operation are shown on pg.28.
Check that all components
are correctly placed.
The machine is warming
up; lights are flashing.
Remove the container.
Fill the coffee bean
container with coffee
beans.
Place a container under
Turn the knob countercloc-
the steam tube.
kwise to start loading the
circuit.
When lights remain steadily lit, the
machine is ready for use.
Fill the tank with fresh
Insert the plug into a
drin-king water.
sui-table electric socket.
Wait until a steady stream
of water flows out from the
nozzle.
Note: You must load the circuit before starting up the
machine for the first time, if it has been inoperative for a
lengthy period or if the water tank has been completely
emptied.
the light is steadily lit:
See rating plate
Move the ON/OFF switch
to "I" to turn on the
machine.
Turn the knob clockwise
to terminate the circuit-
loading process.
the circuit must be also loaded each time
Werbung
Inhaltsverzeichnis
