Specification - Monitor Audio Radius Serie Bedienungsanleitung

11. Mains Voltage Selector
This is factory set to your country's mains voltage specification. Do not attempt to adjust this
as this may lead to permanent damage to the product and even the risk of fire. There is a clear
plastic cover over the selector to prevent accidental adjustment.
The LED on the top of the cabinet indicates whether the unit is in standby mode or operational. It
will be illuminated red when in standby, and green when operational.

Specification

System Format
Low Frequency Limit
Upper Frequency Limit
Amplifier Power Output
Amplifier Classification
Bass EQ Switch
Phase Control
Auto Sensing
Input Level Requirements
Driver Compliment
Input Impedance
Mains Input Voltage
Dimensions (H x W x D)
(Including amp & feet)
Connections
12v Trigger Input
Power Consumption
Weight (unpacked
Radius 380
Active sub-woofer system – Auxiliary (ABR) loading.
18mm MDF cabinet (CARB2 approved)
Variable 40 – 120 Hz @ 24dB/Octave
140 Watts @ 1% THD+N
Class D amplifier with Switch mode power supply (SMPSU)
Standby after approximately 15 minutes if no signal sensed
1 x 8" (200mm) C-CAM
throw driver. 1 x 8" (200mm)
Auxiliary bass radiator
AC 110 - 120 V ~ 50/60Hz
AC 220 - 240 V ~ 50/60Hz
(Factory Region Preset)
308 x 290 x 305mm
12 x 11 x 12 Inch
1/8 7/16
Stereo RCA in, LFE in, 12v Trigger in (3.5mm mono mini-jack)
5 - 12v via 3.5mm mono mini-jack socket
Standby: < 0.5W (ErP approved)
10.16Kg (22lb 6oz)
monitoraudio.com
30Hz (-6dB)
200 Watts @ 1% THD+N
Music/ Movie/ Impact
0 & 180 degrees
Line Level >3.5mV
long 1 x 10" (250mm) C-CAM
®
throw driver. 1 x 10" (250mm)
Auxiliary bass radiator
> 20K Ohms
348 x 330 x 345mm
13
11/16
Typical Idle: < 10W
Max Rated: 200W
13.76Kg (30lb 4oz)
Radius 390
long
®
x 13 x 12 Inch
9/16
5