Precautions During Use - Epson DM-M820 Bedienungsanleitung

❏ Power is supplied from the DC 12V output of the IM-800 or the
AC Adapter OI-MR01.
Related Software
The software utilities listed below are available. If you use a touch
panel, install the touch panel driver from the Touch Panel Driver
CD-ROM for the DM-M820 included in the box. If you use the MSR
for the IM-800, install the MSR utility from the Driver CD-ROM for
the IM-800 included in the box of the IM-800.
❏ Touch panel driver: For each operating system (for Windows
98/NT/2000/XP, and MS-DOS)
❏ MSR utility: For each operating system (for Windows 98/NT/
2000/XP, and MS-DOS)

Precautions During Use

❏ One of the characteristics of the LCD display generally is that
some pixels may not always turn on or off, or there may be an
unevenness of brightness or color. Note that this may not be a
malfunction.
❏ Use the DM-M820 only under the specified conditions.
Otherwise, problems could occur, such as shortened life, poor
display quality, or damage. Particularly, avoid using in high
temperatures or high humidity, and never allow condensation
to form on the DM-M820.
❏ Since the DM-M820 is not waterproof, do not use the DM-M820
in an environment where water may be splashed or spilled on
the unit.
❏ Wipe the touch panel surface lightly with a soft cloth or a cloth
moistened with ethanol or isopropyl alcohol.
❏ Do not use solid or sharp materials, such as a ball-point pen, to
input data to the touch panel.
❏ The DC plug on the exclusive cable is designed only for the
IM-800 and AC Adapter OI-MR01. Do not use the DC plug on a
system other than the IM-800 or AC Adapter OI-MR01.
❏ Do not stop sliding the card during the reading of the data. This
may cause a read error.
❏ The DM-M820 converts the read data to keyboard scan codes
and transmits them to the IM-800. Therefore, do not use the
keyboard while the MSR is reading a card.
❏ Use specified magnetic cards with JIS or ISO format.
DM-M820 User's Manual 5
English