I Method Of Installation - LG PQCSB101S0 Montageanleitung

Method of Installation
1. Hold the front/rear central part of the
central controller with the both hands and
then separate the case by pulling it
ahead or behind while lightly pressing the
front case.
2. Loose 4 screws anchoring PCB and then
separate the rear case and PCB.
3. Anchor the rear case on the installation
surface at holes using anchor screws and
then join the rear case and PCBs.
CAUTION:
1. Install the product on flat surface and install anchoring screws at more than
2 places. Otherwise the central controller may not be anchored properly.
2. Do not tighten anchoring screws too tightly. It may cause deformation of the
case.
3. Do not deform the case at random. It may cause malfunction of the central
controller.
Method of Installation
Hole for anchoring
Installation Manual 11