Introduction; Intended Use; Notes On Trademarks; Features - Parkside PAS 4 C4 Originalbetriebsanleitung

LI-ION CORDLESS
SCREWDRIVER PAS 4 C4

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety in-
structions. Use the product only as described and for
the range of applications specified. Please also pass
these operating instructions on to any future owner.

Intended use

This appliance is designed for screwing into
wood, plastic and metal. The cutting attachment is
designed exclusively for cutting soft materials, such
as card and similar materials up to a thickness of 6
mm. Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.

Notes on trademarks

USB ® is a registered trademark of USB Implementers
Forum, Inc.
All other names and products may be trademarks
or registered trademarks of their respective owner.

Features

Rotation direction switch/safety lock-out
Motor direction indicator for clockwise rotation
Battery charge level indicator
Motor direction indicator for anticlockwise
rotation
Charging socket (appliance)
ON/OFF switch
LED lamps
Tool holder
Charger
9a
USB plug of the charging cable
9b
USB-C plug on charging cable
│ GB │ IE
■ 14
Torque attachment
Lock button
Eccentric attachment
Angle attachment
Cutting attachment
Bits and bit extension

Package contents

1 Li-Ion Cordless Screwdriver
1 charger
1 carrying tool bag
1 charging cable
26 bits x 25 mm
2 bits x 50 mm
1 bit extension
1 torque attachment
1 eccentric attachment
1 angle attachment
1 cutting attachment
1 set of operating instructions

Technical data

Li-Ion Cordless Screwdriver: PAS 4 C4
Nominal voltage:
Battery (integrated):
Battery capacity:
Rated idle speed:
Torque:
Tool holder:
Use only the following charger to charge the
cordless tool:
PAS 4 C4-1:
INPUT:
Rated voltage:
Rated current:
4 V (DC)
(1 cell)
1500 mAh
n 200 rpm
0
max. 5.0 Nm
6.35 mm (¼")
100–240 V ∼ 50-60 Hz
(AC)
16 W
PAS 4 C4