PeakTech True RMS 1700 Bedienungsanleitung Seite 17

2. Introduction
The P 1700 fork clamp meter is used to measure current on
equipment. The fork-shaped opening of the device allows the user
to perform a fast and effective current measurement in hard to
reach areas. Examples of this are the measurements on terminal
blocks in control cabinets or individual wires / leads on electrical
devices. With features such as voltage measurement, resistance
measurement, diode measurement, capacitance measurement and
continuity testing, the P 1700 can cover the most important ranges
of common electrical measurements and convince with its accuracy.
Thanks to the modern inverted and illuminated LCD display, even in
darker locations it is possible to easily carry out the required
measurements. Furthermore, the integrated LED supports the
measuring process by illuminating the environment.
The modern P 1700 stands out with its complete illumination of the
display of all function keys and the function label.
*
Modern fork clamp meter
*
6000 counts illuminated LCD display
*
Switchable mode function
*
MIN / MAX function
*
Hold function
*
Voltage measurement even with low input impedance
(Low Z)
*
Non-contact voltage detector (NCV)
*
Automatic shutdown
*
Measurements of various electrical quantities
-17-