ASROCK FM2A88X Pro+ R2.0 Handbuch Seite 18

2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA3 Connectors
(SATA_1: see p.1, No. 8)
(SATA_2: see p.1, No. 7)
(SATA_3: see p.1, No. 19)
(SATA_4: see p.1, No. 16)
(SATA_5: see p.1, No. 18)
(SATA_6: see p.1, No. 17)
(SATA_7: see p.1, No. 10)
(SATA_8: see p.1, No. 9)
USB 2.0 Headers
(9-pin USB6_7)
(see p.1 No. 21)
(9-pin USB8_9)
(see p.1 No. 20)
USB 3.0 Header
(19-pin USB3_2_3)
(see p.1 No. 6)
Infrared Module Header
(5-pin IR1)
(see p.1 No. 22)
SATA_1 SATA_2
SATA_7 SATA_8
SATA_3 SATA_4
SATA_5 SATA_6
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
1
Dummy
IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND
IntA_PA_SSTX+
IntA_PB_SSTX+
IntA_PA_SSTX-
IntA_PB_SSTX- GND
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX- Vbus
Vbus
IRTX
+5VSB
DUMMY
1
GND
IRRX
FM2A88X Pro+ R2.0
These eight Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Besides four default USB 2.0
ports on the I/O panel, there
are two USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.
Besides two default USB 3.0
ports on the I/O panel, there is
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
17