Siemens SITRANS LR200 Kurzanleitung Seite 16

Programming via the handheld programmer
Notes:
• Press Mode
• While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
• SITRANS LR200 automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu level).
Parameter menus
Parameters are arranged in a 5-level menu structure.
For the complete list of parameters with instructions, see
the full manual.
1. Enter PROGRAM mode
• Point the programmer at the display (from a maximum
distance of 300 mm [1 ft.]).
• RIGHT arrow
opens menu level 1.
• Mode opens the menu level last displayed in
PROGRAM mode within the last 10 minutes, or menu
level 1 if power has been cycled since then.
2. Navigating: key functions in Navigation mode
Note: For Quick Access to parameters via the handheld programmer, press Home
enter the menu number, for example: 2.7. 1 (Volume).
Key Name
UP or DOWN
arrow
RIGHT arrow
LEFT arrow
Mode
Home
Page EN-14 SITRANS LR200 (HART) – QUICK START MANUAL
to toggle between Measurement and Program Mode.
activates PROGRAM mode and
Menu level Function in Navigation Mode
menu or
parameter
menu
parameter
menu or
parameter
menu or
parameter
menu or
parameter
1. QUICK START
2. SETUP
2.1. DEVICE
.............
2.7. LINEARIZATION
2.7.1. VOLUME
Max. 300 mm
Scroll to previous or next menu or parameter.
Go to first parameter in the selected menu, or open
next menu.
Open Edit mode.
Open parent menu.
Change to MEASUREMENT mode.
Open top level menu: menu 1.
2.7.1.1. VESSEL SHAPE
handheld programmer
display
(1 ft)
, then
A5E31993614