6.
Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
7.
Assembling
7.1
IM-3
Once you open the IM-3 box, these are the microscope's components:
②
③
① Microscope body
② Condenser
③ Filter holder
④ LED illuminator
⑤ Phase contrast slider
⑥ Eyepieces
④
⑫
⑤
⑥
⑦
⑦ Centering telescope
⑧ Metal insert for stage
⑨ Glass insert for stage
⑩ Objectives
⑪ Power supply
⑫ Green filter IF550
Page 7
①
⑩
⑧
⑨
⑪