Power On/Pause Power Off; Get Power Supply And Power On; Pause; Power Off - ECOVACS ECO D56 Bedienungsanleitung

6. POWER ON/PAUSE/POWER OFF

Get power supply and power on

____________________________________________________________________________

Pause

____________________________________________________________________________

Power off

ENG - 100
• Turn on the power switch on/off the
bottom firstly.
• Press the key on host and get
power supply. There would be a short
music tip and at the same time LCD lights for roughly
2 second and goes off.
• Then press key to start robot
• Press key, it can pause the operation of robot and keep it
stay where it is.
Tips:
► On the status of pause, you can reset the cleaning mode,
then press key again, it will go back to work.
► Another way to pause is that, when the robot is working you
can press any key on the host or lift it.
• Press key, power is off and the robot stops running.
Tips:
► If you want the robot to stop running, you can press
under pause status, then power is off.
► Put the robot back to the charging block after it stops working
for fear that others would trip or step on.
► Put the robot on the charging block and keep it charging after
finishing house cleaning.
► Do not keep the robot on pause status for long time, because
under pause, the full charged battery can only last for around
20 hours. We suggested you to turn it off when do not want it to
work.
key