Setting The Current Weather; Setting Threshold 1 (Change Of The Weather Forecast Symbols); Setting Threshold 2 For Bad-Weather Warning - Conrad 67 28 61 Bedienungsanleitung

 Setting the Current Weather

The display for the weather forecast is based on observation of the barometric pressure history of the last
hours. This permits accuracy of up to 70%. Setting the current value permits adjustment of the forecast to
the current weather station.
• Touch the display area „TENDENCY" repeatedly until the weather forecast icon flashes (e.g. sun icon).
• Select the current weather with the buttons „+" and „-".

To get to the next subfunction (setting threshold 1) -> touch the display area „TENDENCY" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Setting Threshold 1 (change of the weather forecast symbols)
• Touch the display area „TENDENCY" repeatedly until two arrows flash at the left and a barometric pressure value
flashes at the right in the „PRESSURE" area (e.g. „2.0 hPa").
• Select the barometric pressure at which the weather forecast icons should change with the buttons „+" and „-".
Basic settings ex works are 2 hPa. This means that the weather forecast icons change by 2 hPa when the barometric
pressure rises or falls. In areas with larger barometric pressure fluctuations (e.g. in the Alps), you should set a higher
value.

To get to the next subfunction (setting threshold 2 for bad weather warning) -> touch the display area
„TENDENCY" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Setting Threshold 2 for Bad-Weather Warning
• Touch the display area „TENDENCY" repeatedly until the weather forecast icon for „rain" and an arrow to the left of
it flash. A barometric pressure value (e.g. „4.0 hPa") also flashes at the right in the „PRESSURE" area.
• Select the barometric pressure at which the bad weather warning is to appear with the buttons „+" and „-".
Basic settings ex works are 4 hPa. This means that a change of barometric pressure by 4 hPa within 3 hours will
activate the bad weather warning. The icon for „rain" flashes in the weather forecast area.

To get back to the first subfunction (setting the current weather) -> touch the display area „TENDENCY"
briefly 2x
Leaving setting mode -> touch the button „TENDENCY" briefly 1x (or touch another display area wait for
30 seconds without touching the touch screen)
78