Sleep Mode - Inventum AC902B Gebrauchsanleitung

THE REMOTE CONTROL
Aim the remote control to the sensor of the appliance. The range of the remote control is approx.
8 metres (without obstacles between the appliance and the remote control).
Insert the two supplied AAA 1.5 Volt batteries in the remote control, as indicated in the
drawing. Do take the plus and minus symbols on the inside of the remote control into account.
Note:
• When the remote control is being replaced or will no longer be used, remove the batteries
and dispose them in accordance with applicable legislation, as they are harmful
to the environment.
• Do not mix old and new batteries. Do not use a mix of alkaline, standard (carbon-zinc)
or chargeable (nickel-cadmium) batteries.
• Batteries could explode or leak when exposed to open fire. Hand in batteries at a waste
collection facility or recognised waste collection point.
• Remove the batteries from the remote control when the appliance is not being used
for a longer period of time (winter storage) and keep them on a cool, dry place.
Other functions
The remote control can be used for the same functions as described above. By means of the remote control you can also
control extra modes, i.e. auto mode, sleep mode, timer mode and wind speed.
AUTOMATIC POSITION
When using the automatic position, the appliance automatically selects whether it should cool or circulate air. This mode
can only be adjusted with the remote control.
This depends on the room temperature.
• Press the mode key [
• Press the [ temp and temp
example. When the room temperature is below 23°C, the appliance starts to circulate the air, and above 23°C the
appliance starts to cool.
• It is not possible to adjust the wind speed in this mode.

SLEEP MODE

Use the sleep mode when you want to use the appliance at night. This mode can only be adjusted with the remote control.
• Switch on the appliance in the cooling or auto position.
• Press the sleep key
• If the display light on the appliance bothers you, you can switch it off by pressing the key. Press the key once more
to reactivate the display light.
The sleep mode maintains the optimum temperature in the room, without excessive fluctuations in temperature and air
humidity. Slightly vary room temperature and air humidity to make sure the room remains comfortable.
The selected temperature will rise every half hour by 1°C for a period of one hour. This new temperature is maintained for
the next 7 hours. Then the appliance switches back to the set temperature and remains on in accordance to its setting.
The sleep mode can be cancelled by switching off the appliance, or by pressing the sleep
When using the air circulation and dehumidification positions, it is not possible to use the sleep mode.
ON/OFF key
up key
down key
timer key on
on
timer key off
off
mode key
] until the arrow on the display lights up at the auto mode.
] keys to set the required room temperature (between 17°C and 30°C). 23°C for
.
wind speed key
sleep mode
reset key
lock button
display light on/off on air
conditioner
, mode or wind speed
English
key.
27
•