Bestron DDF45Z Bedienungsanleitung Seite 24

OPERATION - General
The appliance is intended only
for domestic use,
not for professional use.
1. Fan blades
2. Fan housing
3. Motor housing
4. Oscillation button
5. Stop button
6. Speed buttons
7. Power cord and plug
8. Base
9. Base plate
OPERATION - Before first use
Remove the fan from the packaging.
OPERATION - Assembling the fan
1. Attach the base to the base plate, using the click system.
2. Unscrew the locking ring (see figure 2A) from the shaft.
3. Fit the rear of the fan housing (2B) onto the motor-housing (2C), making sure that the openings are
aligned precisely with the lugs on the motor housing and that the grip is at the top.
4. Slide the locking ring (2A) onto the shaft, and screw it tight (clockwise).
5. Slide the fan blades (2D) onto the shaft and place the fixing knob (2E) on the shaft.
6. The rim (2F) has clamps. Carefully fit the rim around the rear half of the fan housing, making sure that
the housing falls into the upper clamp of the rim, so that you can connect the two halfs of the fan housing
with the nut and bolt (2G). Use a crosshead screwdriver.
7. Close the other clamps.
F
8
5
D
E
G
2
1
6
B
A
24
EN
4
3
9
C