Materials in Direct or Indirect Contact with Operator
NewLife Elite:
Concentrator casing .............................. Valtra/ABS
Mains cable ......................................................PVC
Dust filter ..................................................Polyester
ON/OFF switch ................................ Thermoplastic
Casters ............................................................Nylon
Flow adjustment knob ..............ABS/Polycarbonate
Gas outlet ...............................Chrome Plated Brass
Printed labels ..................................................Lexan
Cleaning, Care, and Proper Maintenance
WARNING: CLEAN THE CABINET,
CONTROL PANEL, AND POWER CORD
ONLY WITH A MILD HOUSEHOLD
CLEANER APPLIED WITH A DAMP (NOT
WET) CLOTH OR SPONGE, AND THEN
WIPE ALL SURFACES DRY. DO NOT
ALLOW ANY LIQUID TO GET INSIDE
THE CONCENTRATOR. PAY SPECIAL
ATTENTION TO THE OXYGEN OUTLET
FOR THE CANNULA CONNECTION
TO MAKE SURE IT REMAINS FREE OF
DUST, WATER, AND PARTICLES.
Cabinet
Turn OFF the unit and disconnect from AC or DC
power before any cleaning or disinfection. DO
NOT spray the outer case directly. Use a damp
(not wet) cloth or sponge. Spray the cloth or sponge
with a mild detergent solution to clean the cabinet.
Proceed as directed by the cleaner manufacturer.
Device cabinet should be cleaned at minimum
between users.
NewLife Family
NewLife Intensity 10:
Concentrator casing .......... Valtra/ABS/Polystyrene
Mains cable ......................................................PVC
Dust filter ..................................................Polyester
ON/OFF switch ................................ Thermoplastic
Casters ............................................................Nylon
Flow adjustment .......................ABS/Polycarbonate
Gas outlet ...............................Chrome Plated Brass
Printed labels ..................................................Lexan
WARNING: ELECTRICAL SHOCK
HAZARD. TURN OFF THE UNIT
AND DISCONNECT THE POWER
CORD FROM THE ELECTRIC OUTLET
BEFORE YOU CLEAN THE UNIT TO
PREVENT ACCIDENTAL ELECTRICAL
SHOCK AND BURN HAZARD. ONLY
YOUR EQUIPMENT PROVIDER OR
A QUALIFIED SERVICE TECHNICIAN
SHOULD REMOVE THE COVERS OR
SERVICE THE UNIT.
WARNING: CARE SHOULD BE TAKEN TO
PREVENT THE OXYGEN CONCENTRATOR FROM
GETTING WET OR ALLOWING FLUIDS TO ENTER
THE UNIT. THIS CAN CAUSE THE UNIT TO
MALFUNCTION OR SHUT DOWN, AND CAUSE
AN INCREASED RISK FOR ELECTRICAL SHOCK
OR BURNS.
WARNING: DO NOT USE OIL, GREASE, OR
PETROLEUM-BASED OR OTHER FLAMMABLE
PRODUCTS WITH THE OXYGEN-CARRYING
ACCESSORIES OR THE OXYGEN CONCENTRATOR.
OXYGEN ACCELERATES THE COMBUSTION OF
FLAMMABLE SUBSTANCES.
PN MN239-C4 C | User Manual
ENG - 19