Description Of Components; Features - Pioneer SGY-PM910V Handbuch

This product is a sensor system that analyzes the pedaling of a bicycle in real
time. It calculates the direction and intensity of the force acting on the pedals
and calculates pedaling efficiency.

Description of components

• Strain gauge unit :
Detects the strain on the crank and calculates the direction and intensity of the
force on the crank.
• Magnet:
Used to detect the angle of rotation.
• Transmitters:
Send information from the strain gauge unit and the magnet to the
Cyclocomputer.
Product mode
• When using SGX-CA500, the firmware version is required to be 20150501.02.43 or
higher.
• Pedaling monitor mode:
When paired with Cyclocomputer SGX-CA500, the pedaling efficiency and
cadence and other such properties can be measured. You can make maximum
use of the functions of this product.
• Dual power meter mode:
Left and right sensors are required. The actual power values of the left and right
sensors can be totaled and displayed and the cadence can be measured. Can be
used with SGX-CA500 or with a Cyclocomputer that supports ANT+ from another
manufacturer.
• Single power meter mode:
The power value of the left or right sensors can be doubled and displayed quickly
and the cadence can be measured. Can be used with SGX-CA500 or with a
Cyclocomputer that supports ANT+ from another manufacturer.

Features

EN
3