Beta 1930HLA Bedienungsanleitung Seite 10

OPERATION MANUAL AND INSTRUCTIONS
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR
PERFORMING MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE
OPERATING PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the environmental
hygiene/risk analysis survey if the values exceed the limits under current regulations.
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL
FOLLOWING A SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY
EXPOSURE OF HAND-ARM SYSTEM TO VIBRATION
TECHNICAL DATA
SOCKET DRIVE
ANVIL
BOLT CAPACITY (8.8)
BOLT CAPACITY (12.9)
FREE SPEED
MAXIMUM TORQUE
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (ø)
MAXIMUM AIR CONSUMPTION
WEIGHT
LENGTH
HAMMER DEVICE TYPE
NOISE (ISO 15744)
- SOUND POWER LEVEL
- SOUND PRESSURE LEVEL
VIBRATIONS (ISO 28927)
- VIBRATION LEVEL
Uncertainty
KEY TO SYMBOLS
a: air inlet 1/2" GAS
b: impact wrench trigger
c: side handle
d: rotation reversal lever
e: power adjustment
f: oil lubrication
10
1"
8"
M42 - 65 mm
M33 - 50 mm
3000 rpm
3661 Nm
1/2" GAS
6.2 bars
13 mm
460 l/min
16.4 kg
628 mm
DOUBLE HAMMER
LwA = 113.4 dB
LpA = 102.4 dB
69.6 m/s
2
K=23 m/s
2
GB