Safety Plates And Symbols - Ghibli & Wirbel Power Indust AX20 Z22 Gebrauch Und Wartung

2.3

Safety plates and symbols

Plates with safety warnings and/or signs are applied on the vacuum.
Caution!
Ensure that all safety warning plates are readable.
Wipe the plates with a damp cloth using water and detergents. Do not use any solvents, NAFTA or
gasoline. Damaged plates must be replaced with new ones, available upon request to GHIBLI&WIRBEL
S.r.l.
In case of safety warning plates applied on vacuum components to be replaced, ensure that warning
plates will be applied on the new replaced parts as well.
Caution!
Carefully read the "Operating and Maintenance Manual" before using the vacuum or executing
maintenance operations.
Caution!
Be careful not to get your hands squashed when positioning and securing the vacuum collection
container.
Caution!
Never put your hands between the collection container and the vacuum when positioning and securing
the collection container.
Never put your hands on the collection container edges nearby the check pins when executing the
aforesaid operation, which must be performed throughout the coupling side levers and using BOTH YOUR
HANDS to control them.
Caution!
Do not vacuum incandescent material.
Caution!
Do not vacuum sources of ignition
ENGLISH - 13 -