Esp Function - LG PQRCUDS0 Bedienungs- Und Montageanleitung

ESP Function

E.S.P function is setting the volume of each air flow. It is for the convenience of installation. It is recommended
that you should not use this function whild using the remote controller.
100 unit 10 unit
* The E.S.P value is set at the proper value at the factory. So it is highly recommended that you should do not
change the E.S.P value at your discretion.
Necessary function before using
1
Press the Special Function button.
2
Press the E.S.P button.
3
Set the volume of each air flow (Low, Medium, Hi) by
using the temperature control button. Press the air flow
button to select the air flow.
(The value of E.S.P could be adjusted from 1 to 225.)
(The figure on the left shows when the strong wind's
ESP value has been set to 212.)
4
If you press the E.S.P button one more time, the E.S.P
value will be set and the setting mode will be unset.
Owner's & Installation Manual 11