Management Portal - lockncharge FUYL Tower Secure Charge Station Bedienungsanleitung

FUYL Tower™
Returning to a Locker
MANUAL DOOR OVERRIDE
This can be performed if power is not available to the unit and doors need to be opened.
NOTE: All doors will be opened when using the
manual override. It is NOT possible to manually open
individual doors.
Press 1 to force a single locker to open. After the
locker is opened, it will remain in the unlocked
state, and the old PIN code will be forgotten.
Press 2 to open all the lockers, one by one. All
lockers will become unlocked, and all PIN codes
will be forgotten.
Turn the keyswitch to the right to access more
options.
Press 3 to change the admin PIN. PINs must be 8
digits. The PIN will need to be entered twice.
Press 4 to initiate the diagnostic sequence. Please
consult PC Locs / LocknCharge support before
taking this step.
Turn the keyswitch to the right to access more
options.
These options are only relevant when
performing remote administration. Please refer
to the software manual for the FUYL Tower

management portal.

Use the maintenance key provided to open the
control panel door.