Switching On/Off And Adjusting The Volume; Switching The Led Lights On/Off; Connecting Headphones - Silvercrest SPS 3 A1 Bedienungsanleitung

Switching on/off and adjusting the volume

Turn the ON/OFF | VOL knob
♦
the device . The operating LED
device is switched on .
Turn the ON/OFF | VOL knob
♦
increase the volume .
Turn the ON/OFF | VOL knob
♦
crease the volume .
Turn the ON/OFF | VOL knob
♦
the device . The operating LED
device is switched off .

Switching the LED lights on/off

NOTE
The LED lights
houses .
♦ Set the LED ON / OFF switch
switch on the LED lights
♦ Set the LED ON / OFF switch
switch off the LED lights

Connecting headphones

DANGER
►
Make sure that the ON/OFF | VOL knob
♦
position .
♦ Plug the 3 .5 mm jack plug of the headphones into the
headphone socket
♦ Before putting on the headphones, turn on the speakers
again and carefully increase the volume .
■ 30 │ GB │ IE
are not suitable for lighting rooms in
1
Loud music can lead to hearing damage!
Avoid extremely loud sound levels, especially
over long periods of time, when you are using
headphones .
3
clockwise to turn on
4
lights up as soon as the
6
further clockwise to
4
anticlockwise to de-
4
anticlockwise to turn off
4
goes out as soon as the
6
to the ON position to
7
.
1
to the OFF position to
7
.
1
.
is in the OFF
4
2
SPS 3 A1