Stryker SIDNE Berchtold ChromoVision HR24 Benutzerhandbuch Seite 17

2. The White Balance Command
• The Berchtold ChromoVision Camera takes approximately eight
seconds to complete the white balance command. During this period,
all commands on the tablet and voice interfaces, except "Stop, "
are disabled. When the camera completes the white balance action,
all commands on the voice and tablet interfaces will be enabled.
Do not attempt to issue any other commands to the camera while
it is completing the white balance action.
3. Maximum/Minimum Limits
• The Berchtold Camera - SIDNE interface does not provide
information on certain maximum/minimum limits. The SIDNE
interface (voice and tablet) does not provide any indication regarding
the maximum/minimum limits on the following commands:
– Brightness/Darkness
– Focus Out/In
– Rotate Right/Left
– Zoom In/Out
• If any button on the Berchtold Camera front panel is held down for
more than 10 seconds, the device will disconnect. It will reconnect
when the button is released. While any button is held down, no SIDNE
commands will be accepted.
EN-13