Jacuzzi j-300 serie Montageanweisung Und Bedienung Und Wartung Seite 36

Treble Setting
Press the Audio button 2 times to access the treble setting. The
LCD display will change to "TRE 0,". Press the Up button to adjust
the setting to a maximum of +7. Press the Down button to adjust
the setting down to -7.
Note: The default setting is "0." This feature is disabled when a "Dig-
ital Sound Processor" (DSP) setting is active such as "Rock," "Classi-
cal," or "Pop."
Balance Setting
Press the Audio button 3 times to access the balance setting. The
LCD display will change to "BAL L=R,". Press the Up button to adjust
the setting to a maximum of 10R (only the right side speakers will
have volume). Press the Down button to adjust the setting down
to 10L (only the left side speakers will have volume).
Fade Setting
Press the Audio button 4 times to access the fade setting. The L-
CD display will change to "FAD F=R,". Press the Up button to ad-
just the setting to a maximum of 10F (only the front speakers
will have volume). Press the Down button to adjust the setting
down to 10R (only the rear speakers will have volume).
Digital Sound Processor (DSP) Setting
Press the Audio button 5 times to access the DSP setting. The L-
CD display will change to "DSP OFF,". Press the Up button to se-
lect one of the preset settings such as Rock, Classical or Pop.
If a preset setting is select a small icon will appear
ROCK
on the LCD display.
Area Setting
Press the Audio button 6 times to access the Area setting. The L-
CD display will change to "AREA USA,". Press the Up button to s-
elect either USA or EUR setting.
Loud Setting
Press the Audio button 7 times to access the Loud setting. The L-
CD display will change to "LOUD OFF,". Press the Up button to s-
elect either OFF or ON.
Distant Setting
Press the Audio button 8 times to access the Distant setting. The L-
CD display will change to "DX,". Press the Up button to select either
Distant (DX) or Local for station frequency. The "LOCAL" setting al-
lows for better FM reception when a local station is too strong.
Leave the setting to "DX" if this condition does not exist.
Stereo Setting
Press the Audio button 9 times to access the Stereo setting. The
LCD display will change to "STEREO,". Press the Up button to se-
lect either Stereo or Mono.
Wireless Remote Control Functions
A wireless radio frequency (RF) remote control is supplied on all
spas with the optional audio system. This remote provides con-
trol of the radio and over some media device functions.
External Media Device Playback
The supplied remote control provides no control over external
Auxiliary player operations except for volume control and source
selection. The Auxiliary player performs all external playback op-
erations.
Power Button: Press once to turn ON; Press again to turn
OFF.
Audio Button: Allows access to most of the stereo sound
AUDIO
functions. Press continuously to scroll through the fol-
lowing settings: Bas-Tre- Bal-Fad-DSP-Area-Loud-DX-
Stereo.
Mode Button: Press continuously to switch between "RA-
MODE
DIO," "USB," and "AUX IN" modes. "BT CONNECTED" appears
when a Bluetooth device in paired with the stereo.
Volume Up Button: Used to increase volume between 0
to 30.
Volume Down Button: Used to decrease volume between
30 to 0.
USB Mode: Press to pause track, press again to resume
playing (Device Mode USB)
Mute Button: Press to mute sound, press again to reacti-
vate sound (Radio Mode)
Track Down Button: Press to rewind tracks (Device Mode
USB)
Seek Button: Seeks down for stations (Radio Mode)
Track Up Button: Press to move forward tracks
(Device Mode USB)
Seek Forward Button: Seeks forward for stations
(Radio Mode)
1
Press either of these buttons to change music folders (De-
vice Mode USB)
Preset 1: Press to access a preset station (Radio Mode)
2
Preset 2: Press to access a preset station (Radio Mode)
Press once to repeat the song. Press again to repeat the al-
3
bum (Device Mode USB)
Preset 3: Press to access a preset station (Radio Mode)
Press to play songs in a random order (Device Mode USB)
Not used (Radio Mode)
36
AUDIO
MODE
1 2 3
DIR - DIR + REPEAT RANDOM