Preparation Of The Appliance; Handling The Packed Appliance; How To Unpack The Appliance; How To Transport The Appliance - Fimap FA15+ 2014 230V EU Bedienungs- Und Wartungsanleitung

1.

HANDLING THE PACKED APPLIANCE

The appliance is delivered in specific packaging. These packaging elements
(plastic bags, clips, etc.) are potential sources of danger are potential sources of
danger and must be kept out of the reach of children, incompetent persons, etc.
The overall weight of the appliance plus its packaging is 13 kg
2.

HOW TO UNPACK THE APPLIANCE

The procedure for unpacking the appliance is as follows:
1. Open the outer carton.
2. Remove the accessories inside the carton and gently lay them on the ground.
3. Take out the vacuum head carton.
4. Take out the appliance from the box using the handle (1), taking care not to damage either.
5. Take out the appliance from the protective bag using the relative handle, taking care not to damage either.
WARNING: It is recommended that all the packaging components be kept in case the appliance ever needs transporting.
WARNING: you are advised to always wear protective gloves, to avoid the risk of serious injury to your hands.
3.

HOW TO TRANSPORT THE APPLIANCE

The procedure for safely transporting the appliance is as follows:
1. Do what is required to make sure the appliance is in a safe condition (see paragraph
2. Remove the vacuum hose (1) from the vacuum nozzle (2) on the collection tank, before pulling the vacuum hose press the button (3) for
unlocking the catch.
3. Insert the appliance into the protective bag, taking care not to damage either during this operation.
4. Insert the appliance into the carton, taking care not to damage either during this operation. Remember to place at the bottom of the carton the
block for the wheels of the appliance, position around the collection tank the blocks for preventing damage during transportation.
5. Insert the accessories support and the head block inside the carton.
6. Place the accessories in the carton.
7. Close the carton.
ATTENTION: For transportation in vehicles, secure the appliance in line with regulations in force so that it cannot slide or tip over.
WARNING: you are advised to always wear protective gloves, to avoid the risk of serious injury to your hands.

PREPARATION OF THE APPLIANCE

Page 20
The dimensions of the package
are as follows:
A : 400 mm
B: 420 mm
C: 540 mm
"APPLIANCE SAFETY ").
EN