Getting Started; Using The On/Off Pushbutton; Viewing The Battery Level; Compatible Devices - Silvercrest SLS 2200 A1 Bedienungsanleitung Und Serviceinformationen

purchase a suitable 5V USB power adapter with at least
500mA from any electronics retail outlet.
When using an external power adapter, it must be connected
to an easily accessible wall outlet so that it can be disconnected
quickly in case of an emergency.

Getting started

Using the ON/OFF pushbutton

Powering on
Briefly press the ON/OFF pushbutton (6) to switch the Solar Battery Charger
on. The output voltage LEDs (3) and the battery capacity LEDs (7) light. After
approx. 5 seconds the battery capacity LEDs (7) go off, and the output voltage
LEDs (3) light while a connected device is being charged.
Auto power off
If no device to be charged is connected within 20 seconds, the device will
power off to safe battery power.
Powering off
Keep the ON/OFF pushbutton (6) pressed for at least 3 seconds to switch the
Solar Battery Charger off and to cancel the current charging process.

Viewing the battery level

Press the ON/OFF pushbutton (6) briefly to display the battery level for a few
seconds. The Battery capacity LEDs (7) indicate the battery level as a
percentage (25%, 50%, 75% and 100%).

Compatible devices

The Solar Battery Charger can be used to charge external devices with a max.
charging current of 500mA.
SilverCrest SLS 2200 A1
English - 47