Cleaning The Equipment; Odours - Siemens ki 27fp60 Gebrauchsanleitung

Cleaning the equipment

All variable parts of the refrigerator
compartment can be taken out for
cleaning. (See chapter Variable interior
design".)
Taking out the drawers
Fig. 9
Tilt drawers forwards and take out.
To insert drawers, place the front of the
drawer on the telescopic rails and push
into the appliance. The drawer is engaged
by pushing it into the appliance.
Taking out the humidity filter
Fig. 1/17
The humidity filter above the humidity
drawer can be removed for cleaning.
To do this, first take out the humidity
drawer and pull out the humidity filter.
Lift off the filter cover, Fig. 0, and take out
the filter. Clean in lukewarm water. Leave
to dry and re assemble.
Remove telescopic rails
Fig. w
1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear pin.
4. Push telescopic rail together, push
backwards above the rear pin and
disengage.
Install telescopic rails
1. Place the extended telescopic rail on
the front pin.
2. Pull the telescopic rail forwards slightly
until it engages.
3. Place telescopic rail on the rear pin.
4. Push lock backwards.

Odours

If you experience unpleasant odours:
S Switch off the appliance with the main
switch. Fig. 1/5
S Take all food out of the appliance.
S Clean the interior. See section
Cleaning the appliance".
S Clean all packages.
S Seal strong smelling food in order
to avoid odours from forming.
S Switch on the appliance again.
S Store food in the appliance.
S Check whether the formation of odours
is still occuring after 24 hours.
S Change the odour filter. Fig. q
The odour filter is situated behind
the upper cool fresh" drawer.
Replacement filters are available from
your customer service.
en
29