Updating Firmware - ELAC IW-S10EQ Handbuch

Updating Firmware

To update the firmware of the IW-S10EQ amplifier follow the below instructions.
Download the latest firmware from www.elac.com/firmware. Save this file to your desktop and unzip the hex file.
Type in the IP address for the subwoofer amplifier as explained in the "Configure network settings" section of
this manual.
1. Click on the Update Firmware button (This will open up the file browser on your computer)
2. Select the hex file that you downloaded and select open. The update process will begin immediately.
3. The URL in the browser will update itself to display success when complete.
4. Click on the Soft Reset button. After rebooting the firmware update is complete.
ELAC IW-S10EQ-W Subwoofer | www.elac.com | Page 11