NEC MultiSync XP-Series Bedienungsanleitung Seite 9

E-4 Introduction
A 0.28 mm dot pitch in conjuktion to the Invar Shadow Mask and the
Dual Dynamic Beam Focus increases the clarity and displays greater
detail. Good clarity allows your eyes to flow over the screen image and
more easily view the on-screen information.
Up-front BNC/D-SUB Selection Button on the monitors allows you to
connect two systems to one MultiSync XP-series monitor. This front
panel button allows you to select a system. Use the MultiCable with the
D-Sub connector to display the video of one system, and use the BNC
inputs to display the video of another system. Using the same XP-series
monitor, you can easily select either one of the systems by simply
pushing the BNC/D-SUB Button.
The Global Sync control of the model MultiSync XP21 also minimises
any effects of the earths magnetic field on screen performance.
Emission Test
The ErgoDesign also incorporates reduced electrostatic and
electromagnetic emission. NEC monitors follow the strictest magnetic
field, alternating electric field, and electro-static recommendations of
TCO and SWEDAC (Swedish Board for Technical Accreditation),
previously known as MPR (National Board for Measurement and
Testing), which specify maximum recommended values of electric and
magnetic fields.
NEC MultiSync Monitors conform to SWEDAC MPR 1990:8 (MPRII)
and TCO 92 (with the use of an optional Lens) Testing Methods for
emission. These standards are the most restrictive guidelines in the
world.
The Multiple Frequency Technology automatically adjusts the monitor
to the video card's scanning frequency thus displaying the resolution
you require. The MultiSync XP-series also supports multiple operating
platforms including IBM compatible and Macintosh family systems
(with optional Macintosh-Kit).
Increased Resolution adds to the image clarity, and the MultiSync
XP-series provides a wider range of higher resolutions for your needs
for now and in the future.