Concise Product Description; Setting Table - Nibe HPAC 28 Montage- Und Bedienungsanweisung

GB
18
In order to get the ultimate benefit from your HPAC climate control module you should read
through these Installation and Maintenance Instructions.
HPAC combined with FIGHTER 1120/1220 is a climate control system for heating and cooling
houses and apartment buildings. Ground, rock or lakes can for instance be used as the heat
exchange source.
HPAC is a Swedish-made quality product offering a long life span and reliable operation.
To be filled in by the installation engineer when the heat
pump is installed
Installation date
Type designation/serial number
HPAC 28
Installation engineers
Type of brine __________________
Mixing proportion/freezing point ______________
Settings
FIGHTER 1120/1220
Menu
9.2.16 Cooling system
2.3 Flow temp./MIN
2.9.1 Cooling curve
2.9.2 Offset cold curve
2.9.3 Starttemp. cooling
2.9.4 Diff Passive/Active
______________
Date
General
_ _ _ _ _ _ _ _ _ _ _ _ _ _
Factory
setting
.................. Off
.................. 15
.................. 2
.................. 0
.................. 25
.................. 4
______________________
Signature
HPAC 28