Gedore DVV13Z Bedienungsanleitung Seite 18

Straight reaction arm:
1. Fit both the output
square (D) and the
adjustable locking knob
with reaction "slave"
square (J) with an
impact socket (see
section 3.3).
2. Loosen the locking
knob (J) by turning it
counterclockwise.
3. Fit the output square
(D) and the attached
impact socket on the
bolt to be tightened (K).
4. At the same time, fit the
impact socket on the
reaction "slave" square
of the locking knob (J)
on the support bolt (L).
5. Tighten the locking
knob by turning it
clockwise (J).
Stepped reaction arm:
1. Fit both the output square (D) with an impact socket (see section
3.3).
2. Position the output square (D) along with impact socket on the
screw to be screwed down.
NOTE: To make the work easier, the DVV-540RS can be
suspended from the eyebolts employing appropriate sling
EN
K
18
D
L
gear.
J