SHOOTING BASICS (Cont.)
En
Recording movies
Mode dial
setting
2
Point the camera towards a
subject while viewing through the
viewfinder or the monitor.
3
Press the shutter button halfway.
● The green lamp lights up.
4
Press the shutter button all the way to
start recording.
● The card access lamp blinks and the camera
starts writing the movie to the card.
● During movie recording,
5
Press the shutter button all the way again to stop recording.
● If the displayed seconds remaining reach "0", shooting finishes
automatically and the camera starts writing the movie to the card.
32
1
Remove the lens cap. Set the mode dial to
the POWER switch.
lights in red.
and press
Card access lamp
Green lamp
Seconds remaining