Innovaciones M.S. CARRO TOKYO Bedienungsanleitung Seite 32

carry cot installation instructions
Basket installation and disassem-
bly.
1. Installation: insert the support
rods at both ends of the basket into
the blanks until they are completely
stuck in the groove. as shown in F
gure 1: Finally, the canopy, lining and
seat Pull the zipper between them.
2. Disassembly: vice versa.
Unlock and lock the handle:
Unlock and lock the handle::
1. Unlock: Press the button on both
sides in the direction of the arrow
(Fig. 2) to press the unlock button.
When you hear a clear "beep", it
indicates The handle has been
unlocked.
2, lock: pull the handle to the direc-
tion of the foot of the basket, hear a
clear "beep" sound, lift the lock
¡¡ NOTE !!
BEFORE LIFTING THE BASKET,
MAKE SURE THE HANDLE IS LOC-
KED IN PLACE.
Installation and disassembly of the basket and frame:
1. The head of the basket is oriented toward the cart. The sides are aligned with the
seat socket. Press the red arrow in the direction as shown in the figure.The "beep" indi-
cates that the basket is in place.
2. Press the seat ejection button on both sides at the same time, and the sleeping
basket pops up, indicating that the lock has been unlocked.
¡¡ NOTE !!
32
Support rod
Blank
figure 1
figure 2
head
figure 3
BEFORE USE, LIFT THE BASKET UP TO MAKE
SURE THE BASKET IS IN PLACE.
Foot