Inserting Batteries; Installing The Remote Control Holder; Operating Method - LG MFL67415208 Bedienungsanleitung

Inserting batteries

Insert batteries before using the remote
control. The battery type used is AAA (1.5 V).
1
Remove the battery cover.
2
Insert the new batteries and make sure
that the + and – terminals of the batteries
are installed correctly.
3
Reattach the battery cover.
NOTE
!
If the display screen of the remote control
starts to fade, replace the batteries.

Installing the remote control holder

Install the holder where there is no direct sun-
light to protect the remote control.
1
Choose a safe and easily-accessible place.
2
Remove the adhesive sticker protection
film from the back of the holder before at-
taching it to the wall.
3
Fix the holder by fastening the 2 screws
firmly with a screwdriver.
4
Slide the remote control into the holder.

Operating method

Point the remote control towards the signal
receiver at the bottom of the air conditioner to
operate it.
NOTE
!
• The remote control may operate other
electronic devices if pointed towards
them. Make sure to point the remote
control towards the signal receiver of
the air conditioner.
• For proper operation, use a soft cloth to
clean the signal transmitter and receiver.
BEFORE USE
9