Tuning Operations; Automatic Tuning; Manual Tuning - Yamaha RX-396RDS Bedienungsanleitung

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

AUTOMATIC TUNING

1
Select "TUNER" as the input source.
TUNER
2
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
3
TUNING
MODE
AUTO/MAN'L MONO
4
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
DOWN TUNING UP
* If the station where tuning search stops is not the desired
one, press again.
* If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to
the MANUAL TUNING method.

TUNING OPERATIONS

NATURAL SOUND STEREO RECEIVER
STANDBY/ON
A/B/C/D/E 1 2 3
BASS TREBLE
PHONES SPEAKERS
0 0
l l l
A B
2 2 2
3 3 3
4 4 4
ON OFF
5 5 5
PHONO CD
or
AUTO
TUNER PHONO CD
TAPE 2
AUX TAPE 1/MD
MONITOR
4 5 6 7 8
BALANCE LOUDNESS
FM/AM DOWN TUNING UP
0 FLAT
l l l l
–30dB
2 2 2 2 l0
TUNING
3 3 3 3 9 MEMORY EDIT MODE
4 4 4 4 8
5 L 5 5 R 5 7
6 MAN'L/AUTO FM AUTO/MAN'L MONO
1 2 4

MANUAL TUNING

1
Select "TUNER" as the input source.
2
Select the reception band (FM or AM) confirming it on
the display.
FM/AM
3
TUNING
MODE
AUTO/MAN'L MONO
4
Tune to a desired station manually.
* To continue tuning search, hold down the button.
Notes
•
If you tune to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
•
RX-496RDS and RX-396RDS only
When tuned in to a station, the frequency of the received
station is shown on the display. If an RDS station that
employs PS data service is received, the frequency is then
replaced by the station name. Refer to page 23 for details.
VOLUME
l6
20 l2
28 8
4
40
60 2
0
–dB
3
TUNER PHONO CD
or
Turn the "AUTO"
indicator off.
DOWN TUNING UP
17