Teac AG 790 Bedienungsanleitung Seite 9

A POWER switch
Press this switch to turn the unit on or off.
B STANDBY indicator
This indicator lights when the unit is in the standby mode.
In the standby mode, press the STANDBY/ON button of the
remote control unit or the Input buttons of the main unit to
turn the unit on.
When the unit is turned on, the indicator goes off.
C REMOTE SENSOR
When operating the remote control unit, point it towards the
REMOTE SENSOR.
D SPEAKERS indicator
This indicator lights when the SPEAKERS button (A or B) is set
to on.
E Display
When the unit is on, the current status of the unit is
displayed.
F
MUTING indicator
This indicator blinks during the muting.
G
LOUDNESS indicator
This indicator lights when the LOUDNESS button is set to on.
H
VOLUME/JOG
Turn this knob (or press the VOLUME buttons of the remote
control unit) to adjust the volume.
I
BALANCE button
Press this button and turn the VOLUME/JOG dial to adjust.
J
TREBLE button
Press this button and turn the VOLUME/JOG dial to adjust.
K
BASS button
Press this button and turn the VOLUME/JOG dial to adjust.
L
RDS MODE button
In FM tuner mode, use this button for RDS function.
RDS is available in European countries only.
M
LOUDNESS button
Use this button to compensate for the loss of bass at low
volumes.
N INPUT
(CD, PHONO, TUNER, TAPE MONITOR, VIDEO/AUX)
Used to select a function.
When the unit is in the standby mode, press any one of these
buttons to turn the unit on.
O TUNING/PRESET buttons
In the manual tuning mode, use these buttons to tune in a
station.
In the preset tuning mode, use these buttons to select a
preset channel.
P
MEMORY button
Use this button to store preset channels into memory.
Q
FM MODE button
Use this button to select stereo or monaural.
R
BAND button
Use this button to select FM or AM.
S
TUNING MODE button
Use this button to select the manual tuning mode or the
preset tuning mode.
T PHONES jack
For private listening, insert the headphones plug into this jack,
and adjust the volume by turning the VOLUME knob.
U SPEAKERS buttons
Use these buttons to turn on or off the speakers.
on : Sound is output from the speakers.
off : No sound is output from the speakers.
a STANDBY/ON button
When the power switch of the main unit is depressed, use
this button to turn the unit on or standby.
b
MEMORY SCAN button
Use this button to scan preset channels.
c Operation buttons for TEAC's cassette tape deck and CD
player
Use these buttons to operate TEAC components with
mark.
d MUTING button
Use this button to mute the sound.
e SLEEP button
Use this button to set sleep timer.
f INPUT
(CD, PHONO, TUNER, TAPE MONITOR, VIDEO/AUX)
Used to select a function.
Note:
To simplify explanations, instructions in this manual refer to
the names of the buttons on the front panel only. Associated
controls on the remote control will also operate similarly.
9