Technical Data; Specified Conditions Of Use - Gude GE 2200 Originalbetriebsanleitung

ENGLISH

Technical Data

16
Petrol Auger
Art. No
Contents
Motor output
tank capacity
Fuel mix
Weight
Noise details
Sound pressure level L
Measured sound power level L
Guaranteed sound power level L
Measured according to
Wear ear protectors!
Vibration details
Total vibration values (triaxial vector sum) Determined properly EN ISO 11806
Vibration emission value a
Uncertainty K = 1,5 m/s
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Use the appliance only outside, never use it in
confined and bad ventilated areas.

Specified Conditions Of Use

Petrol augers are designed to drill single holes in the
ground for inserting posts or for drilling footings for
forestry, gardening and landscaping purposes.
This machine must not be used for any work other
than that for which the machine is designed and
which is described in the operating manual. Any
1)
pA
1)
WA
2)
WA
EN ISO 11806;
1)
h
2
Read and understand the operating
instructions before using the
appliance. Familiarise with the
2000/14/ EG; Uncertainty K = 3 dB (A)
2)
other use will be deemed incorrect. The manufacturer
cannot accept any liability for resulting damage or
injuries. Please note that this machine is not designed
for commercial use.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
It is necessary to comply with the regulations applica-
ble in the country where the truck is used.
GE 2200
94139
52 cm3
2,2 kW / 3 PS
1,2 l
40:1
16,8 kg
90,7 dB (A)
111,5 dB (A)
113 dB (A)
7,5 m/s
2