Using The Rotary Spit Function - KKT KOLBE EB8501ED Benutzerhandbuch

Using the device

Using the rotary spit function

1 A
F
In combination with all heating types with rotary spit
function , a rotary spit can be used.
After fitting the food on to the spit (S), block it with the
two forks (F), then proceed as follows:
• Position the spit support as shown (1/2).
• Fit the end of the spit into the motor (M) at the back of
the oven.
• Fit the support into the circular groove in the spit (1).
• Unscrew and remove handle (A).
32
M
S
1
2
• Place the oven tray with a little water on the lowest
shelf of the oven.
• Set one of the heating types with the symbols
, , or to start up the motor.
• Close the oven door.
• When the cooking time is up, screw the handle (A) on
the spit and remove everything from the oven.
If necessary, use an oven glove to avoid any burn.
See also section „Roasting / Grilling with a rotary spit"
A
A