English; Meat Grinder - Koenic KMG 4151 B Gebrauchsanweisung

Size - A5

English

Note:
It is recommended, to apply some oil to the
components P, Q and D to increase their
durableness during storage.
Warning
The blade is very sharp. Be careful when
handling the blade.
Tips for processing foodstuffs

Meat grinder

• Remove tendons, gristles, bones etc. before
processing, in order to prevents blockage of
the meat grinder.
• Cut the meat into smaller cubs (approx. 2.5 x
2.5 x 2.5 cm) or oblong pieces.
• Push the meat down slowly and steadily. Do
not fill in too much meat at once.
• Use the grinding discs in the order from
coarse to fine.
Sausage production
• Push the sausage meat down slowly and
steadily. Do not fill in too much at once.
• Adjust the speed of pushing down the
sausage meat to the desired length and
width of the sausages.
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not
work
Product works
slowly and appears
overloaded
18
KMG4151B-Meat Grinder_190809_V06_HR.indb 18
Kibbeh production
• Push the Kibbeh dough down slowly and
• It is helpful to pre-form smaller rolls or balls
• Make sure that the consistency of the
Spritz Biscuits
• Push the cookie dough down slowly and
• It is helpful to pre-form smaller rolls or balls
• Make sure that the consistency of the
Possible causes
• Interrupted power
supply.
• Product is overheated.
• Overfilled
• Continuous operation.
steadily. Do not fill in too much at once.
before processing, in order to simplify the
actual processing.
Kibbeh dough is suitable for processing and
that it's not too firm.
steadily. Do not fill in too much at once.
before processing, in order to simplify the
actual processing.
cookie dough is suitable for processing and
that it's not too firm.
Note:
It is normal, that some meat, dough etc.
remains in the auger after processing.
Solution
• Check the power supply.
• The product is overheated. Unplug and
let the product cool down for approx.
30 minutes.
• Reduce content.
• The product is not suitable for
continuous operation. Unplug and let
the product cool down in order to avoid
overheating.
12/8/2019 10:09