Declaration Of Conformity - Carson Reflex Wheel X2 Betriebsanleitung

Attention:
Before using your product for the first time or ordering any spare parts, check that your manual is fully up-to-date. This manual contains the
technical appendices, important instructions for correct start-up and use and product information, all fully up-to-date before going to press. The contents
of this manual and the technical data of the product can change without prior notice. For the latest version of your manual, see: www.carson-
modelsport.com

Declaration of conformity:

Co. KG hereby declares that the radio equipment type 500500049 conforms
to Directive 2014/53/EU. The complete text for the EU declaration of
conformity is available at the following Internet address.
www.carson-modelsport.com/de/produkte.htm
Warranty declaration: www.carson-modelsport.com/de/service/
gewaehrleistung/
Maximum transmission power: 100 mW (20db) Modulation FHSS
This model is not a toy!
the model only if supervised by an adult. Operating RC models is a fascinating hobby that, however, must only be exercised with proper precautions
and care. Since the weight of this model is considerable and it can reach a very high speed it can, if it runs out of control, cause significant damage and injury
for which you, as the operator, are liable. Only a correctly assembled model will work and react as expected. Never improvise with unsuitable materials but,
when the need arises, use only original spare parts. Even if the model is pre-assembled, all joints and fastenings should be checked for correct seating and
tightness.
R/C models can be dangerous and could cause personal injury or damage to
property. The appeal of driving an RC model depends on assembling the model
accurately and operating it with due care and attention.
1. Follow all the warnings, and instructions in this manual.
2. Be „Safety Conscious" and use your common sense at all times.
3. Remember that operating any R/C model demands skills developed
through proper instruction and training – they are not acquired
immediately.
4. Don't run risks, such as operating your model in adverse weather or
when there is a malfunction of which you are aware.
5. The remote control's special technology makes the 2.4 GHz transmitter
and receiver a single unit and coordinates them together. Therefore,
the receiver is not influenced by any other transmitter or radio signal.
It is no longer necessary to check whether other models nearby are
running on the same frequency channel, as was the case with previous
frequencies (27/35/40 MHz).
GB // 8
TAMIYA-CARSON Modellbau GmbH &
This product is not a toy, its operation must be learned step by step. Children under 14 years of age should operate
The explanation of the symbol on the product, packaging or
instructions: Electronic devices are valuable products and
should not be disposed of with the household waste when
they reach the end of their service life! Help us to protect the
environment and respect our resources by delivering this
appliance to the relevant recycling point.
6. Respect the rules of the R/C track on which you operate your model.
7. Running your model in the street is very dangerous to both automobile
drivers and your model. Avoid running your model in the street.
8. Never aim or direct your model car at any person or animal. These
model cars accelerate very quickly and can cause serious physical
injury.
9. At any time during the operation of your model, should you sense, feel,
or observe any erratic operation or abnormality, end your operation.
Do not operate it again until you are certain that the problems have
been fixed. RC models are not "toys" – safety precautions and forward
thinking are essential when operating a remote controlled model!
10. Take advantage of the failsafe setting. During a breakdown in signal
transmission (such was when transmission voltage is too weak), this
setting shifts the model into a control mode that prevents it from
taking off uncontrolled.
Take your time to read all the way through the pages of this book-
let before starting the installation.