KKT KOLBE GS63VI Benutzerhandbuch Seite 68

Troubleshooting
Problem
Detergent left in
dispenser cups
Steam
Black or gray
marks on dishes
Water standing on
the bottom of the
tub
Dishwasher
leaks
If you have technical questions about
your device, please contact:
KKT KOLBE Support
Tel. +49 9502 667930
Mail: info@kolbe.de
www: www.kolbe.de
→ Further information and documents
can be found on our website under
Support-Center.
68
Possible Causes
Dishes block detergent
Cups
Normal phenomenon
Aluminum utensils have
rubbed against dishes
This is normal
Overfill dispenser or
rinse aid spills
Dishwasher
isn't level
What To Do
Re-loading the dishes properly.
There is some steam coming through the
vent by the door latch during drying and
water draining.
Use a mild abrasive cleaner to eliminate
those marks.
A small amount of clean water around the
outlet on the tub bottom keeps the water
seal lubricated.
Be careful not to overfill the rinse aid
dispenser. Spilled rinse aid could cause
oversudsing and lead to overflowing.
Wipe away any spills with a damp cloth.
Make sure the dishwasher is level.