Cooling Operation - Hitachi RAK-18QH8S W Bedienungsanleitung

COOLING OPERATION

Use the device for cooling when the outdoor temperature is 21~ 43°C.
If in doors humidity is very high (80%), some dew may form on the air outlet grille of the indoor unit.
Press the FUNCTION selector so that the display indicates
1
(COOL).
Set the desired FAN SPEED with the
display indicates the setting).
(AUTO)
2
(HI)
(MED)
(LOW)
(SILENT) : Fan speed ultra slower.
Set the desired room temperature with the TEMPERATURE button
(the display indicates the setting).
3
The temperature setting and the actual room temperature may vary
some how depending on conditions.
Press the
beep. Press the button again to stop operation. The cooling function
does not start if the temperature setting is higher than the current
START
room temperature (even though the
STOP
The cooling function will start as soon as you set the temperature
below the current room temperature.
As the settings are stored in memory in the remote controller, you only
■
have to press the
: The FAN SPEED is HI at fi rst and varies to MED
automatically when the preset temperature has
been reached.
: Economical as the room will become cool
quickly.
: Fan speed slow.
: Fan speed slower.
(START/STOP) button. Cooling operation starts with a
(START/STOP) button next time.
– 8 –
(FAN SPEED) button (the
(OPERATION) lamp lights).