Herunterladen Inhalt Inhalt Diese Seite drucken

Signal Input - HK Audio L.U.C.A.S Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für L.U.C.A.S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

WELCOME TO THE
HK AUDIO FA M I LY !
The Lightweight Ultra Compact Active System, L.U.C.A.S for short, is
a complete active two-way satellite system featuring a subwoofer and
two mid/high modules as tops. All of the system's electronics are
housed in the subwoofer: the crossovers, corrective equalization, con-
ventional limiters for the tweeters, our time-tested Dynaclip circ u i t ry
for the bass speakers, plus the power amps and circuit breakers. The
integrated electronic circ u i t ry is precisely matched to the speakers,
making it easy for you to achieve the best possible sound and to
e n s u re the system's
superior impulse response, while also allowing you to rest assure d
that the system is protected from overloading. What's more ,
L.U.C.A.S is about as easy to use as it gets. You don't have to worry
about tweaking frequencies or perf o rming time-consuming sound
checks trying to determine the right levels. All you have
to do is set up the system components, connect five cords and
y o u ' re ready to ro l l .
To achieve excellent sonic results
quickly using L.U.C.A.S,
follow these five simple steps:

1. Signal Input

The two electronically balanced XLR jacks serve as the inputs for the
audio signal. You also have two parallel outputs available for connec-
ting additional power amps. L.U.C.A.S can handle a stereo or mono
signal, so if the need arises for a more powerful system, for instance
in a larger venue, you can combine two systems and operate them in
tandem, each in mono mode. Each of the two inputs is equipped with
a gain pot that controls its sensitivity so that you can adjust the
L.U.C.A.S power amps to the level of the input signal for the best
audio re s u l t s .
Note: If you want to operate L.U.C.A.S in mono mode, you must
route the mono input signal to the second input of L.U.C.A.S via a
m i c rophone cord. In other word, connect the cable from the Parallel
Out of the input that you're using to the second input. This is the
only way the mono signal will be sent to both tops.
HOME

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis