Authorized Use; Basic Safety Instructions - bürkert 8835 Matrix Bedienungsanleitung

Authorizeduse
2

AUTHORIZED USE

Non-intended use of the matrix Type 8835 may be a hazard to
people, nearby equipment and the environment.
▶ The matrix 8835 regulates the flow control of heating and cool-
ing water in commercial vehicles.
▶ Do not use the device outdoors.
▶ The approved data, the operating conditions and conditions of
use specified in the contract documents, operating instructions
and on the rating plate are to be observed during use. These are
described in Chapter "5 System description".
▶ Use the device only in conjunction with third-party devices and
components recommended and authorized by Bürkert.
▶ Correct transportation, storage and installation, as well as care-
ful use and maintenance are essential for reliable and faultless
operation.
▶ The device must not be used in explosion-risk (Ex) areas.
▶ Supply only media to the media connections that are specified
in section "6 Technical data" as flow media.
▶ Do not supply the control air connections with liquids.
▶ Do not physically stress the housing (e.g. by placing objects on
it or standing on it).
▶ Do not cover the vent holes of the valves.
▶ Do not make any external alterations to the housing of the
device. Do not paint housing parts or screws.
▶ Use the device only for its intended purpose.
Type 8835
3

BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any
• contingencies and events which may arise during the assembly,
operation, and maintenance of the devices.
• local safety regulations – the operator is responsible for observing
these regulations, also in relation to the installation personnel.
Danger – high pressure!
Scalding caused by discharge of hot medium.
▶ Before loosening lines or valves, leave the device to cool down,
turn off the pressure and vent/drain the lines.
Risk of electric shock.
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
Risk of burns/risk of fire due to hot device surface and hot
lines.
▶ Keep the device away from highly flammable substances and
media and do not touch with bare hands.
General hazardous situations.
To prevent injuries:
▶ Ensure that the system cannot be activated unintentionally.
▶ The device must only be operated when in a perfect condition
and in consideration of the operating instructions.
english
5